Shavano Encoder

Finally an encoder that makes 4K video portable.

Shavano encodes 4K using HEVC or H.264 compression. Shavano compresses 4K video to simultaneously stream to many different destinations including:

  • Point-to-point on an internal network

  • Point-to-point over the WAN

  • Multicast on a local network

  • to a decoder located on a different network

  • to a variety of online video platforms

 

 

     Video Encoding/Decoding

Quad Core Qualcomm Snapdragon 820 (APQ8096) processor

Input Resolutions
3840×2160p30, p25, p24, p23.98;

1080p60, p59.94, p50, p30, p25, p24, p23.98;

720p60, p59.94, p50

576p50;480p60, p59.94

Encode Resolutions

3840×2160p30, p25, p24, p23.98;

1080p60, p59.94, p50, p30, p25, p24, p23.98;

720p60, p59.94, p50

576p50; 540p*; 480p60, p59.94; 360p*; 270p*; 180p*;

*scaled resolutions, frame rate same as source

Compression: H.265/HEVC (up to 4Kp30), H.264

Bit rates: .5Mbps-30Mbps; Rate control: Variable, Constant

      Audio Encoding/Decoding

Encode: MPEG-4 AAC-LC in ADTS 64-320kbps

Encode Sampling Freq: 32, 44.1, 48KHz

      Streaming Capabilities

Unicast and Multicast
RTP over UDP, Raw UDP
Up to 2x Unicast, 1x Multicast, and 1 x RTMP simultaneous channel output

RTMP

RTSP

   I/O

HDMI 1.4 input up to 2160p30

3G-SDI input up to 1080p60

USB 3.0 interface

Audio embedded in HDMI and 3G/HD/SD-SDI

Audio embedded in HDMI and 3G-SDI and 3.5mm Analog Audio input

10/100/1000 Ethernet (RJ-45)

     Network and Control

REST API integrates with third-party controllers and applications

Full-featured web browser based UI
Encoder and decoder configuration for unicast, multicast and RTMP

DHCP (Default) / Static IP Address

Command and Control: HTTP

Auto-detect and discover other Videon encoder and decoder units on subnet

     General

+12V Input; under 10W total (not including external peripheral)

IEEE802.3af PoE enabled

Dimensions: 1.5” x 5.0” x 4.234”

Action Button to start/stop RTMP encoding and for Factory Reset